Horizontal,Vertical Rotary Tables

Rotary tables are widely used for circular cutting work, setting the angle of a workpiece, boring, spot-facing and similar work. Available in table diameters from 100mm to 406mm (4″ to  16″)

Features

1.	These rotary tables are made of high density Meehanite
2.	Precision bearings are used to provide rigidity and accuracy under load.
3.	Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible.
4.	They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.
5.	Using the Key guide block, the center can be corrected quickly and accurately.

 

ITEM NO.	TESTING OBJECTIVE	VARIATION(INCHES)(MM) MAXIMUM TESTED
1	FLATNESS OF CLAMPING SURFACE(CONCAVE)	.0006(0.015)
2	PARALLELISM OF CLAMPING SURFACE TO BASE	.0008(0.0.02)
3	SQUARENESS OF CLAMPING SURFACE TO ANGLE FACE	.0008(0.0.02)
4	TRUE RUNNING OF CLAMPING SURFACE	.0006(0.015)
5	TURE RUNNING OF CENTER HOLE MEASURED AT HOLE EDGE	.0008(0.0.02)
6	INDEXING ACCURACY OF DIRECT INDEXING MECHANISM MAXIMUM CUMULATIVE SPACING ERROR	45″

 

ORDER NO.	Table			Base dimension			Bolt slots	The Load Capacity For Rotary Table		Center sleeve	Gross Weight kg/lb
	Outer dimensions		Height
	A1	D	H	H1	A	B	g	Horizontal	Vertical
HV-4	70	110	80	85	145	115	12	35KGS	18KGS	MT-2	(C)7.5
HV-6	78 3.07	150 5.91	80 3.11	100 3.94	200 7.87	160 6.30	15 0.59	40KGS	20KGS	MT-2	(C)13
HV-8	100 3.94	200 7.87	105 4.13	135 5.31	265 10.43	220 8.66	17 0.67	80KGS	40KGS	MT-3	(C)26
HV-10	110 4.33	250 9.84	115 4.53	165 6.50	325 12.80	280 11.02	17 0.67	90KGS	50KGS	MT-3	(C)37
HV-12	130 5.12	300 11.81	135 5.32	195 7.68	388 15.27	330 12.99	18 0.71	120KGS	60KGS	MT-4	(C)70
HV-14	150 5.12	350 13.78	140 5.51	230 9.03	450 17.72	380 14.95	18 0.71	130KGS	70KGS	MT-4	(C)92
HV-16	150 5.90	406 15.98	155 6.10	255 10.03	500 16.69	430 16.93	18 0.71	140KGS	60KGS	MT-4	(C)122